Answer
Time vs Height of Water Level
This data represents the changing water level in a container over time. Measurements were taken every second to observe how the water height increases with each passing second.
| Time (s) | Height of Water Level (cm) |
|---|---|
| 0 | 0 |
| 1 | 1 |
| 2 | 1.5 |
| 3 | 1.8 |
| 4 | 2 |
| 5 | 3 |
| 6 | 5 |
| 7 | 7 |
| 8 | 8 |
| 9 | 8.6 |
| 10 | 8.8 |
| 11 | 8.9 |
| 12 | 9 |
Detailed Analysis
- From 0 to 4 seconds, the water level increases slowly and somewhat irregularly. This suggests a slower inflow or narrow opening at the start.
- From 5 to 7 seconds, there’s a more rapid increase (especially 3 cm in 2 seconds), possibly indicating a change in flow rate or wider pipe connection.
- From 8 to 12 seconds, the height gradually levels off, increasing only marginally, which may imply that the container is nearing full capacity.
- The curve formed by plotting this data would initially show a concave upward shape, then linear, and finally taper into a plateau, indicating saturation.
📌 Conclusion: The water level exhibits non-linear growth over time, starting slow, speeding up mid-way, and then approaching a near-constant maximum. This behavior is typical in fluid systems with changing pressure or container shape.